DOORS
Entrances, bathrooms, offices
Casement door with glass.
Bathroom door.
Door with panel board for office use.
DEORIA, U.P.00:00 GMT+5:30
UPVC SYSTEMSWINDOWS / DOORS
ENQUIRIES9082622562
UPVC WINDOWS AND DOORS, MADE TO MEASURE
© 2026 FENORA FRAMES. ALL RIGHTS RESERVED. BY MANVI SRIVASTAVA AND VINAY.
RATES SHOWN ARE INDICATIVE. FINAL PRICING FOLLOWS SITE MEASUREMENT.
UPVC WINDOWS AND DOORS,
MADE TO MEASURE.
MEASURED. FABRICATED. INSTALLED.
ONE FRAME FOR EVERY OPENING,
BUILT TO THE EXACT SIZE.
(scroll down)
(drag around to view)
Entrances, bathrooms, offices
Casement door with glass.
Bathroom door.
Door with panel board for office use.
Laminated finish
For projects where the frame colour is part of the design.
2 track, 3 track, bathroom door and ventilator.
Priced on request after site measurement.
Fixed and openable
Designed around the opening size, the ventilation you need and the sightline you want.
Fixed, single openable or double openable.
Utility solutions
uPVC ventilators and louvers, priced by size.
Partitions for offices and internal divisions, priced on measured area.
2 track and 3 track
Clean proportions, practical operation and flexible configurations for homes and commercial openings.
Two sliding glass shutters, or two glass shutters with a mesh shutter for ventilation and screening.
Tell us the opening, the configuration and the finish you have in mind. Treat the catalogue as a planning reference. We take it from there.
Every opening is measured on site. Exact size governs the price, so the final quotation follows the measurement.
Frames are fabricated to the measured size with 5mm clear glass and standard hardware. Other glass, hardware, colours or finishes are priced on request.
Fabrication and installation are included in the standard pricing basis. GST and transportation are extra, as applicable.
(scroll down)
Holds its shape under load.
Tensile strength 43.6 MPa. Flexural strength 62.9 MPa. Shore-D hardness 79. Welded corners held 45.21 N/mm² in compression.
Sun, rain and cold, simulated.
100 hours under a xenon arc with water-spray cycles: no discoloration, deformation or cracking. No cracks from a falling mass at −10 °C. Water absorption 0.05%.
Self-extinguishing, fungus resistant.
Flammability rated V0. No fungal growth across five species. RoHS 2.0 parameters within limits.
Five pages from two independent laboratories.
(click a page to open)
TEST REPORT 0863 / 08.10.2024
LAB : CIPET: IPT, Lucknow (Govt. of India)
ISSUED TO: M/s Shani Corporation Ltd.
Twelve tests to ASTM and IS methods on SCL CORA uPVC profiles. Density 1.46 g/cc. Tensile strength 43.6 MPa. Flexural modulus 2713 MPa. Vicat softening at 79 °C. Heat deflection at 72.6 °C under 1.82 MPa. Flammability V0, self-extinguishing.
REPORT 2207090016 / 25.07.2022
LAB : ATMY Analytical Labs, Faridabad
ISSUED TO: M/s Shani Corporation Ltd.
Welded corners and T joints held 45.21 N/mm² in compression (EN 514). No cracks after a 1 kg mass fell 1500 mm at −10 °C. No deviation in bending and flattening (BS EN 12608).
REPORT 2207090016 / PAGE 3
LAB : ATMY Analytical Labs, Faridabad
METHOD : EN 513, DIN EN 12608-1
100 hours under a xenon arc simulating terrestrial daylight, with a water-spray cycle every two hours. Observation: no colour discoloration, no shape deformation, no cracking and no abnormality.
REPORT 2207090016 / PAGE 4
LAB : ATMY Analytical Labs, Faridabad
METHOD : ASTM G21
Seven days at 23 °C against five species, including Aspergillus niger and Penicillium. Result on every one: no fungal growth observed.
REPORT 2207090016 / PAGES 5 TO 8
LAB : ATMY Analytical Labs, Faridabad
METHOD : IEC 62321, IS 12235 (P-7)
Cadmium, mercury, hexavalent chromium, PBBs and PBDEs not detected. Lead and phthalates well inside the RoHS 2.0 limits. No visual change after 14 days in sulphuric acid at 55 °C.
Independent results for SCL CORA uPVC profiles, the profile system we fabricate with. Samples submitted by the manufacturer, M/s Shani Corporation Ltd. Full reports: (CIPET, 2 pages, PDF) (ATMY, 8 pages, PDF)
(inspect the labels)
(move here to turn on flashlight)
All prices shown are indicative. Exact measurements may change the final price.
GST and transportation are extra, as applicable.
Unless specifically stated, rates are based on 5mm clear glass and standard hardware.
Special requests are priced according to the current value of sourcing the requested material.
Final pricing is subject to exact site measurements and the confirmed product configuration.
(click the labels for product info)
STARTING FROM₹460 / SQ FT
(send a query about sliding windows)STARTING FROM₹420 / SQ FT
(send a query about casement windows)STARTING FROM₹650 / SQ FT
(send a query about doors)STARTING FROM₹2,800 / PIECE
(send a query about ventilators)STARTING FROM₹420 / SQ FT
(send a query about partitions)STARTING FROM₹950 / SQ FT
(send a query about coloured profiles)Tell us about the opening. Your query goes to Fenora Frames on WhatsApp at 9082622562, and we reply with the next step: a visit to measure.